• <source id="0ag8u"></source>
  • <menu id="0ag8u"><strong id="0ag8u"></strong></menu>
  • Hi,歡迎訪問東莞華力機械有限公司網站!

    華力·精益求精,創造未來

    Constanly Stive For Excellence
    Service
    Hotline
    服務熱線
    0769-85309082
    產品分類 Product Categories
    4產品中心
    您的位置: 首頁 ->  產品中心  -> 電子鋸系列
    重型電腦數控高速裁板據HPS135

    重型電腦數控高速裁板據HPS135

     詳情說明

    MODELHPS135

    MAX BLADE PROJECTION
    最大鋸片引升高度
    Maximum main blade height from table
    主鋸片離臺面最高度
    135mm
    CAPACITY
    鋸切能力
    鋸切尺寸 Maximum cutting dimension 3250×3250mm
    鋸切厚度 Maximum cutting depth 120mm
    MAIN SAWBLADE
    主鋸片
    主鋸片直徑 Main blade diameter ?460mm
    主鋸片內徑 Arbor diameter ?60mm
    主鋸軸轉速 Main blade speed 4050 R.P.M.
    SCORING SAWBLADE
    副鋸片
    副鋸片直徑 Scoring blade diameter ?180mm
    副鋸片內徑 Arbor diameter ?45mm
    副鋸軸轉速 Scoring blade speed 5800 R.P.M.
    SAW CARRIAGE
    鋸座
    前進速度 Feed speed 100M/min
    后退速度 Return speed 120M/min
    MOTOR
    馬達
    主鋸片馬達 Main sawblade motor 18kw/24HP
    副鋸片馬達 Scoring sawblade motor 2kw/1.5HP
    鋸座驅動馬達 Saw carriage drive motor 2.4kw(AC伺服)
    高壓送風機馬達 High pressure blower motor 3.75kw/5HPx2
    推板器送拉料驅動馬達 Pusher motor 2.6kw(AC伺服)
    推板器送拉料速度 Pusher speed 80M/min
    OTHERS
    其他
    使用氣壓 Working air pressure 5-7kg/C㎡
    工作臺離地高度 Table height from floor 920mm
    凈重 Net weight 6200kg

    Machine Structure 機架結構

    Normalized steel frame structure is specially heat treated to resist deformation.Heavy duty structural design ensures stability during high capacity cutting.
    優質鋼材機架經特別回火處理消除應力,保證長期不變形。重型結構設計,即使在進行高速大量鋸切時,機身仍能保持穩定。

    Saw Carriage 鋸座

    The saw carriage runs on two guides that are mounted on the main frame.The bottom guide and the main frame absorb the saw carriage weight.The top guide is located close to the saw spindle to prevent \"side-play\"of the saw carriage. The whole saw carriage system is driven by servo with positional controlled.
    鋸座沿著安裝在主機架上的頂及底路軌往覆行走。底路軌和主機架承托機座重量;頂路軌靠近鋸軸,有效防止鋸座擺動,確保鋸切精準。整個鋸座系統以伺服驅動及定位。

    Easy Maintenance 方便檢修

    The saw carriage can be driven out of the working zone.This ensures ease of maintenance.
    鋸座可離開加工區,方便進行檢修。

    Saw Elevation 鋸片升降

    The height of the main and scoring saws can be set independently.The structure is supported and sliding on heavy duty linear bearing guides.This design ensures high stiffness and cutting precision.
    主鋸及副鋸高度可獨立調整。整個結構以重型線性軸承承托及滑行,確保高剛性與高精度。

    Saw Carriage Structure 鋸座結構

    The saw carriage is driven by a 2.4kW servo motor coupled with speed reduction unit and rack/pinion. German "LEUZE"photo sensor is used to set the carriage start-up position with reference with the stack width and begin the cutting cycle.
    鋸座行程以2.4千瓦伺服電機驅動,配合減速箱和齒輪/齒條傳動。采用德國名廠“LEUZE"光電開關偵測板料寬度,自動設定鋸座起步位置,并即時開始鋸切。

    Saw Height Projection 主鋸高度引伸

    The HPS 135 detects automatically the stack height and directly set the main blade height projection from the table. This improves the cutting accuracy without human intervention.
    自動偵測板料厚度,直接設定主鋸片的引伸高度。在無人為影響下,提高鋸切精度。
    Air Floatation Working Table enables the stack can easily move around on it without scratching its bottom surface.(Option)
    板料可以在氣墊式工作臺上輕松移動而底面不易被刮花。(可選購配置)

    Cutting faster and better
    開料更快更準

    When performing cross cut,the Side Aligner Roller always stays in contact with the stack,no matter it is sizing or the pusher moving forward/backward with the stack.This reduces the cycle time and ensures higher cutting accuracy.The position of the side aligner roller is automatically set by the NC according the stack width.
    當進行橫切工序,無論在鋸切期間或板料被推擋送前或拉后,側拍板輥輪會保持靠緊板料。從而節省橫切時間,并提高鋸切精度。
    拍板裝置采用電腦控制,根據板料寬度自動設定拍板輥輪的位置。

    Double Roller Side Aligner(Option)
    雙輥輪式側拍板系統(可選購配置)

    The rollers are fitted on the two sides of the pressure beam.The rollers can move together or independently according to the cutting cycle.(Option)
    兩個輥輪分別安裝在壓梁兩邊,可按鋸切需要,同時或單輥行動。

    Control System 控制系統

    The system uses Industrial Computer installed with Software that works in PC interface.It controls all the major movements of the machine,including the main beam,saw carriage,side aligner,pusher and grippers.It also optimizes the main blade projection height according to the stack thickness.It is possible to connect the machine to a Bar Code Printer.(Option)
    采用工業電腦及以PC作介面的軟件,對裁板機進行各種設定及動作控制,包括壓梁,鋸座,側拍板,推板器及夾板器。另外,亦可根據板料厚度,優化設定主鋸引伸高度。本設備可連接條形碼打印機。(可選購配置)

    Remote Adjustment of Scoring Unit
    遠程設定副鋸

    With specialized software,the position of the scoring unit(Height and In/Out)can be remotely set from the main control panel.(Option)
    可通過數控軟件,從操作面板遠程設定副鋸的高度和進/出。(可選購配置)

    Floating Type Panel Grippers
    懸吊式浮動夾板器

    The pusher is installed with Suspended Floating Grippers.The pressure by the grippers can be adjusted to prevent damage on the panels and scratching the stack bottom.The plastic grip at the gripper end can be replaced.
    推板器裝有采用懸吊式浮動夾板器。夾板器壓力可調,保護板件不會被夾傷及磨損底面。夾板器末端膠模塊可更換。

    Pusher 推板器

    The Pusher is driven by a 2.6kw servo motor with European KEB high precision speed reducer,run on linear round bar,high speed rack and pinion system and positioned by European contactless magnetic tape.Maximum speed up to 80m/min.
    推板器采用2.6KW伺服馬達驅動,配合歐制KEB精密減速器,歐制高精度無接觸式磁性尺在直線圓棒導軌和齒輪/齒條高速定位,最高每分鐘80米。
    • 地 址地 址:東莞市厚街涌口管理區華發路1號
    • 聯系人聯系人:陳先生
    • 手 機手 機:188-2030-4403
    東莞華力機械有限公司 版權所有 [BMAP] [GMAP] [后臺管理] [百度統計] 訪問量:
    *相關網頁素材均來源互聯網,如有侵權請速告知,我們會在24小時內刪除*
    技術支持:東莞網站建設
    關鍵詞:木工數控鉆、家具封邊機、木板裁板機、家具排鉆機、磨刀機
    [粵ICP備19065147號]
    无码中文字幕波多野结衣不卡 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>